Equipment

This is a partial list of the equipment used by R.D. & Associates Specialized Services Inc.

Bobcat Loader

This is the Bobcat Loader that R.D. & Associates uses for most landscape and excavating applications.

Tracked Bobcat

This is the Bobcat 864 Compact Track Loader that we use for tough digging applications that require more traction. The rubber tracks make it ideal for soft ground conditions.

Dump Truck

Our Dump Trucks can deliver quantities from as little as one ton or one cubic yard to as many as 15 tons of rock or 16 cubic yards of mulch or compost. We can deliver virtually anything our customers may require with these trucks.

Mower

Brushcat Rotary Mower mows down weeds and brush, including trees up to 3 inches in diameter.

Auger

Our Post Hole Auger attachment allows us to dig deck footings or post holes quickly and efficiently.

Grapple Bucket

The Grapple Bucket attachment is used to move timbers, debris, brush piles or vegetative materials.

 
Manlift

This is our Genie Z45 manlift.  It has a working height of 50 feet and four wheel drive which enables us to position it in the best possible location to remove or trim trees with greater efficiency.

Brush Chipper

Morbark Model 13 Brush Chipper, chips brush and tree limbs up to 12 inches in diameter. It reduces brush volume about 7 to 1.

Excavator

The Samsung Excavator can dig over 12 feet deep and has rubber tracks to preserve pavement and lawns.

Stump Grinder

Vermeer Model 502 Stump Grinder, grinds stumps of all sizes, will grind stumps 16-18 inches below ground level.

Tree Terminator

This is the Tree Terminator tree shear. With this attachment we can cut down trees up to 12 inches in diameter in a matter of seconds. This attachment allows us to cut large numbers of smaller trees very quickly, which enables us to clear larger areas at reduced cost to the customer.

Chip Truck

This is the Chip Truck that is used to not only tow the brush chipper, but also to catch, contain, and transport the wood chips produced by the chipper. This truck has a capacity of 30 cubic yards. This capacity enables us to chip and haul brush from one or more jobs, reducing costs.

Pole Setting Attachment

This is the EZ Spot UR pole setting attachment.  When mounted on a bobcat this attachment will pick up poles up to 32 feet in length, weighing up to 1500 pounds and place them with precision.

 
Ditch Witch R300 Loader

The Ditch Witch R300 loader is only 3.5 feet wide and can get into backyards and confined areas to haul out brush and logs.

Vermeer SC852 Stump Grinder

The Vermeer SC852 Stump Grinder has all of the capabilities of a large tow-behind grinder and is still small enough to fit through a 3 foot gate to take on backyard stumps.

Teupen TC69A Manlift

The Teupen TC69A manlift is less than 4 feet wide making it small enough to get into almost any backyard. It's 69 foot platform height makes trimming and removals more efficient and precise.